Polk Audio RMDS-1 - Manual (Page 3)

Even if you don’t have the room for full-size home theater
speakers, you still deserve great sound. This is the theory behind
the development of “subwoofer/satellite” systems, whose coffee-
cup-sized satellites can be placed conveniently and invisibly
almost anywhere. These systems produce remarkable sound for
their size, but even the best “sub/sat” systems have never quite
equaled the performance of full-size speakers.
Knowing this, we set out to develop the ultimate “sub/sat” system.
One with the convenience of a “sub/sat” system, and the
performance you expect from Polk Audio.
Ultimately, we found that the only way to achieve our
goal was to design not only the speaker system but the
preamp, surround processor, and amplifiers as well.
By optimizing the speakers and electronics for each
other we achieved a much higher level of performance than any
previous sub/sat system!
When we were finished, we found we had created something
entirely new: a no-compromise sub/sat surround system with all
of the electronics for a high-performance Dolby Digital home
theatre—integrated into a single, complete system.
We call it the RM Digital Solution: “An Intelligent A/V Pre-amp
Processor and High Performance Loudspeaker System.” With
the RMDS-1, you have everything you need—except sources.
There’s no need to choose a receiver or separate surround
processor or multi-channel power amplifier. With the RMDS-1
you already have them. They’re built-in. And, most importantly,
you know that they were designed specifically for each other to
deliver no-compromise performance.
You don’t need an advanced degree in digital electronics to get the
most out of this system. We’ve done the work for you. The RMDS-1
is a complete system. Everything is pre-optimized to achieve
the best possible performance. No complicated
setup procedures are required.
Simply plug everything in, and enjoy!
S
IMPLY
C
OMPLETE
H
OME
T
HEATER
:
T
HE
RM D
IGITAL
S
OLUTION
P
ERFORMANCE
C
ONVENIENCE
S
IMPLICITY
www.polkaudio.com 3