Philips DVD Micro Theatre MCD759D - Manual (Page 22)

22
English
Switching the system on/off
● Press ECO POWER/STANDBY-ON B (B
on the remote).
➜
“
HELLO” is displayed briefly. The system will
switch to the last selected source.
●
Press DISC, TUNER, iPod or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press ECO POWER/STANDBY-ON B (B
on the remote).
➜
“
ECO POWER” is displayed briefly. The
interactive sound settings, last selected source
and tuner presets will be retained in the player’s
memory.
Switching the system to Eco
Power Standby mode
● Press ECO POWER/STANDBY-ON B in
the active mode.
➜ The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
●
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
●
If the system is normal standby with clock display,
press and hold ECO POWER/STANDBY-
ON Bfor 3 seconds or more to switch to Eco
power standby or vice versa.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Turn VOLUME (-/+) clockwise or anticlockwise
(or press VOL +/- on the remote) to increase
or decrease the volume level.
➜ ” VOL XX” is displayed on the display panel.
“ XX” denotes the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
“ MUTING” flashes.
● To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Sound Control
DBB and DSC sound features cannot be
activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
● Press DBB on the remote to enable/disable
DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
➜ In DBB ON mode, the DBB icon will light up.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
FLAT, POPS, JAZZ, CLASSIC or ROCK.
Basic Operations
pg 001-046_MCD759D_37_Eng 2007.6.21, 14:39 22