Master module, Talkback features – Peavey X-Four User Manual

Page 75

p. 75

master module

talkback features

The

TALKBACK

system provides facilities for assigning an external signal

(usually the console operator's microphone) to any of the console's out-
puts.Other signals can be routed through the

TALKBACK

system include the

tone oscillator or the built in

PINK NOISE

generator.

talkback level

This control sets the level that appears at any of the outputs with

their respective

TALK TO

switches engaged. It also governs the audio level

at the

TALKBACK

output

XLR

connector on the rear panel.

pink noise

The

TALKBACK

in-connector is disabled and

PINK NOISE

is sent though

the

TALKBACK

system.

talkback on

—TALK ON

This switch must be activated for the

TALKBACK

system to operate.

There are two-ways to activate it:

Momentary - Depressing the button for more-than 1/2 of a second will

cause it to act as a momentary switch.When the button is released, the

TALKBACK

section will be shut-off.

Toggle - A quick tap on the button (less-than 1/2 second) will cause the

switch to electronically change its state from on-to-off or from off-to-on.