Group module, Fader reverse – Peavey X-Four User Manual

Page 47

p. 47

group module

fader reverse

The

AUX

GRP

feature is used to swap the functions of the

AUX MASTER

con-

trols and the

GROUP MASTER

controls and the

AUX MASTER

and

LEFT

RIGHT

MAIN

controls.

Swapped controls include: the

TALK TO

switch, the

SOLO

switch, the

MUTE

switch, and the

MASTER LEVEL

control (via rotary control on the

AUX MASTER

and a fader on the

GROUP MASTER

reversing aux / group and aux / main

AUX—red

LED

off

The

AUX

1–6 and

GROUP

1–4

MASTER

and

LEFT

RIGHT MAIN

level controls,

SOLO

MUTE

and

TALK TO

switches operate as normal in their default con-

figuration.

GRP—red

LED

AUX

and

GROUP

functions are reversed.

The

AUX

1– 6 output levels are controlled by the output faders.

The

AUX SAFE PREVIEW LED

AUX SOLO

, and

AUX TALK TO

switches apply to

the

GROUP

output signal.

The

GROUP

1–4 and

LEFT

RIGHT MAIN

output levels are controlled by the

rotary

AUX

1–6

MASTER

level controls.

The

GROUP SOLO

GROUP MUTE

and

GROUP TALK TO

switches apply to the

AUX

output signal.

aux 1–6 output level

The

AUX MASTER

output level controls set the levels that appear at the

corresponding

AUX

output connectors on the rear-panel.

talk to—aux 1–6

Adds the

TALKBACK

system output to the associated

AUX

output.The

level of the

TALKBACK

signal is set by the

TALKBACK

level control in the

MAS

TER

section.

after-fader listen—

AFL

Pressing this switch will include the

AUX

(when illuminated) or

exclude (when not illuminated).

see—master module

LED