Maintenance – Polaris Outlaw 9922485 User Manual
Page 149
146
Maintenance
Battery
Battery Installation
Always install a fully charged battery. Using a new battery that has not been fully charged
can damage the battery and result in a shorter life. It can also hinder vehicle performance. If
recharging is necessary, use a .5 amp battery charger.
1. Place the fully charged battery in the mounting bracket. Reinstall the battery plate and
tighten the two nuts securely to retain the battery in the mounting bracket.
2. Connect and tighten the red (+) cable first. Connect and tighten the black (-) cable last.
Torque the battery terminal bolts to 3.5 ft. lbs. (4.7 Nm).
3. Install the mounting bracket and battery to the vehicle. Tighten the three bolts.
4. Verify that battery cables are properly routed.
Battery Storage
Whenever the vehicle is not used for a period of three months or more, remove the battery
from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place.
Check battery voltage each month during storage. Recharge as needed to maintain a full
charge.
- 2007 ATV Outlaw 90 2007 ATV Sportsman 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 Predator 9920872 Outlaw 9921488 Sportsman 9921483 Sportsman 9922475 Outlaw 9921811 2011 ATV Outlaw 50 Sportsman 9921796 2013 ATV Outlaw 50 2011 ATV Sportsman 90 2011 ATV Outlaw 90 2012 ATV Outlaw 50 2013 ATV Outlaw 90 2013 ATV Sportsman 90 2012 ATV Sportsman 90 2012 ATV Outlaw 90 2011 ATV Outlaw 525 IRS Outlaw 450 MXR Outlaw 9922479 Outlaw 9922079 Outlaw 9922483 Outlaw 525 S Outlaw 9921801 2015 ATV Outlaw 50 2014 ATV Outlaw 90 2014 ATV Sportsman 90 2016 ATV Outlaw 50 2016 ATV Outlaw 110 2016 ATV Sportsman 110