Premier Mounts Polaris Universal Projector Mount MAG-PRO - Manual (Page 4)

MAG-PRO
Page - 4 - Installation Manual
Features
Congratulations on the purchase of your new Premier Mounts Polaris™ Pro Universal Projector Mount. The Polaris™ Pro features
our exclusive MagnaGuide® Technology which will assist the installer for quicker installation times and peace of mind.
A Security Set Screw
B 1-1/2” NPT
C MagnaGuide® Upper
Assembly
D M4 x 12mm Security
Screw and Star Washer
E Locking Tab
F Barrel Cap
G Magnets
H Mounting Hardware
I Radial Glide™
Set Screw
J Leveling Barrel
K MagnaGuide™ Lower
Assembly
L
M
N
Projector Plate
M6 Square Nut
Mounting Leg
Selecting the Proper Mounting Hardware
1. Invert the projector and locate the mounting points.
2. Test each size of the screws provided.
3. The correct screws should thread easily into the mounting point and not pull out when pressure is applied.
DO NOT OVERTIGHTEN YOUR MOUNTING SCREWS TO THE PROJECTOR CHASIS. USING THE
INCORRECT SCREW DEPTH MAY CAUSE DAMAGE TO YOUR PROJECTOR.