Philips DVD741VR - Manual (Page 32)

POWER
MARKER
SEARCH MODE DISPLAY SLOW ZOOM
OUTPUT SELECT
3
4 5 6
7 8 9
SPEED
TIMER SET
0 +10
2 1
VCR DVD
CLEAR
REPEAT
SETUP
TITLE RETURN MODE
CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
REC/OTR REPEAT
DISC
MENU OK
PAUSE
REW FF
PLAY STOP
VCR/TV
MEMORY
STATUS/EXIT TIME SEARCH
32 Recording One Channel/Watching Another
• If you use a Cable Box or Direct
Broadcast System hookup, you
may not be able to watch one
channel while recording another.
See pages 9-10 for details.
Helpful Hint
2,5
1
3
4
Select the channel you
want to watch at the TV.
Select channel 03
or 04 at the TV.
● Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1 Press VCR, then press REC/OTR to record the cur-
rent TV channel. Details are on page 31.
2 Press VCR/TV once to put the DVD/VCR in TV posi-
tion. The VCR/TV light will disappear from the front of the
DVD/VCR.
3 Use the TV remote control to select the channel
you want to watch at the TV.
4 To return to the channel being recorded, use the TV
remote control to select channel 03 or 04 at the TV
(the channel to which the CH3/CH4 switch on the back of
the DVD/VCR is set). Or, if you connected the DVD/VCR
to the TV using audio and video cables, select the correct
audio and video in channel at the TV. Details are on page 11.
5 Press VCR/TV on the DVD/VCR remote control to
put the DVD/VCR in VCR position. The VCR/TV light
will appear on the front of the DVD/VCR.The channel
being recorded will appear on the TV screen.
6 Press STOP C (p) to stop the recording.
6
VCR
H9231CD(EN).QX3 02.9.5 7:13 PM Page 32