Pelco CAMCLOSURE C2410M-G - Manual (Page 10)

[ 10 ] Pelco Manual C2410M-G (1/04)
(Design and product specifications subject to change without notice.)
SPECIFICATIONS
General
Operating
Temperature:
-50
°
to 122
°
F (-46
°
to 50
°
C)
De-ices to 25
°
F (-4
°
C)
Pan/Tilt
Adjustment:
Manual; 360
°
pan; 180
°
tilt
Construction: Aluminum with steel camera
mounting bracket and poly-
carbonate dome
Finish: White polyester powder coat
Dimensions
Above Ceiling: 1.75 (H) x 3.50 (W) inches
(4.45 x 8.89 cm)
Below Ceiling: 2.42 (H) x 5.48 (W) inches
(6.15 x 13.90 cm)
Bubble: 3.75-inch diameter
Environment: Low temperature,
indoor/outdoor
Weight: 1.70 lb (0.77 kg)
Switch Settings for Varifocal Lens
The high resolution camera with
varifocal lens and auto iris is
configured at the factory for
optimal performance in lighting
conditions where auto iris is
required. It is also configured with
the shutter speed set at 1/60
(NTSC) or 1/50 (PAL) and AGC
set at 6 dB of gain.
To enable automatic exposure
Turn on switch 7, and then turn on/off switch 4 for
electronic shutter control, switch 5 for backlight
compensation, and switch 6 for flickerless
motion.
To manually set and lock AWB
Place a white background in front of camera and
turn off switch 1.
For gamma correction
Switch to accurately reproduce scene brightness;
when turned on, y = 0.6, and when turned off,
y = 1.0.
For gain control
Switch 3 On increases gain by 6 dB, and switch 3
Off increases gain by 18 dB.
CAUTION
Do not change the shutter
speed unless you understand how changing the
settings will affect the scene detail.
Shutter Switch Number and Position
Speed 7 6 5 4
1/60 (NTSC)
1/50 (PAL)
1/100 Off On On
1/250 On Off On
1/500 Off Off On
1/1000 On On Off
1/2000 Off On Off
1/4000 On Off Off
1/10000 Off Off Off
Off
On On On
1 2 3 4 5 6 7 8
OFF
FACTORY SETTINGS
= SWITCH POSITION
01060
1 AWB Automatic white balance
2 GAM Gamma function
3 AGC Automatic gain control
4 ESC Electronic shutter control
5 BLC
Backlight compensation
6 FL Flickerless
7 AE Automatic exposure
8 Not used AE Functions
To enable auto iris and manually set shutter
speed
Turn off switch 7; set switches 4, 5, and 6 for the
desired shutter speed.
Electrical
Input Voltage:
12 VDC or 24 VAC,
±
10%
Power
Consumption:
13 watts or less
Video Connector: BNC
Certifications
NTSC and EIA
Models:
UL and cUL
NTSC and PAL
Color Models:
FCC, Class B (excluding auto
iris models)
EIA and CCIR
Monochrome
Models:
FCC, Class A (excluding auto
iris models)
PAL and CCIR
Models:
CE Class B, UL and cUL
All Models: Suitable for use in environ-
mental air handling spaces