Precor 5.37 - Manual (Page 65)

Owner’s Manual: Advanced Programming and Troubleshooting 63
Viewing the Usage Log
USAGE LOG scrolls across the display.
14.When you are ready, press OK to view each program, the
number of times it has been used, and the associated
cumulative minutes. The usage log is helpful in
determining user preferences in program selection.
15.Use the navigational arrow keys to select and view usage
information about each specific program.
Note: For a list of programs, refer to PROGRAMS
Keypad and Table 3.
16.When you are ready, press OK to move to the next
display (error log).
Viewing the Error Log
ERROR LOG scrolls across the display.
17. When you are ready, press OK to determine how many
errors exist in the error log or press the ▼ arrow key to
cycle back to the ODOMETER display.
Note: If there are no errors in the log, you will see NO
ERRORS displayed. When you press OK, you return to
the ODOMETER display.
18.Press OK again to view the first entry in the error log.
19.To move through the error log, continue to press the ▼
arrow key. Each error code specifies when it occurred,
listing the error code, odometer, hour meter and current
(amps) values.
Note: Use the ▲ arrow key to review prior error log
entries. To exit the error log, press OK while the code
scrolls across the display.
20.Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
537_Owners Manual.book Page 63 Monday, August 6, 2007 9:08 AM