Precor 5.37 - Manual (Page 27)

Owner’s Manual: Display Console 25
CROSSRAMP: Press and hold the CROSSRAMP
arrow keys to increase or decrease the ramp incline
from 1 to 20.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display.
Ramp changes occur only when the foot pedals are in
motion. The number that appears on the display
indicates the selected CrossRamp setting, not the
degree of incline. There is not a one-to-one relationship
between the degree of incline and the CrossRamp
setting. Refer to Table 2. It provides an approximation of
the relationship between the CrossRamp setting and
the degree of incline.
Table 2. Relationship between CrossRamp setting and
degree of incline
The CrossRamp setting affects the column height in the
program profile. Refer to Diagram 12.
The CrossRamp has an auto-leveling feature and
returns to the number 1 setting each time you return to
the Precor banner or turn the EFX off, and then on. To
adjust the level so the CrossRamp automatically returns
to a higher CrossRamp setting, refer to Changing EFX
Settings.
QUICKSTART: Press QUICKSTART to start your
workout immediately using the Manual Program. Refer
to Choosing QUICKSTART.
RESISTANCE: Press and hold the RESISTANCE
arrow keys to increase or decrease the resistance in
from 1 to 20.
Right Selection Key: Every time you press this key the
display reflects your cumulative strides, your strides per
minute, or your vertical gain. An LED lights and
indicates which information is being displayed.
CrossRamp Setting Degree of Incline
1 13°
6 20°
11 27°
16 34°
20 40°
537_Owners Manual.book Page 25 Monday, August 6, 2007 9:08 AM