Frequently asked questions, Helpful hints, Vhs dvd – Panasonic DMR-E75V User Manual
Page 64
Helpful Hints
64
Set up
Page
Disc
Page
Recording
Page
Frequently asked questions
What equipment is necessary to
play multi channel surround
sound?
≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
–
Are the headphones and speakers
directly connected to the unit?
≥You cannot directly connect to the unit. Connect through the amplifier etc.
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (P
B
/P
R
) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because this unit’s component video output terminal outputs
a progressive output signal.
Is my TV progressive output
compatible?
≥All Panasonic TV that have 480P input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
–
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if their region number does not include “1” or
“ALL”.
–
Can a DVD-Video that does not
have a region number be played?
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
–
Please tell me about DVD-R and
DVD-RW compatibility with this
unit.
≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that
are finalized.
≥This unit also records and plays 1k–4k recording speed DVD-R discs.
≥This unit does not record or play DVD-RW.
Please tell me about CD-R and CD-
RW compatibility with this unit.
≥You can play CD-R and CD-RW on this unit that are created using a compatible format.
≥You cannot write to a CD-R or CD-RW with this unit.
Can I record from a commercially
purchased video cassette or DVD?
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
–
Can a DVD-R recorded on this unit
be played on other equipment?
≥You can play on DVD-R compatible players after finalizing the disc on this unit; however,
due to the condition of the recording, play may not be possible.
How many times can I write to a
DVD-RAM disc?
≥You can write to the disc approximately 100,000 times depending upon the conditions of
use.
–
Can I record digital audio signals
using this unit?
≥You cannot record digital signals. The digital audio terminals on this unit are for output
only.
–
Can a digital audio signal from this
unit be recorded to other
equipment?
≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio
Output” settings to the following from the SETUP menu.
- PCM Down Conversion “ON”
- Dolby Digital “PCM”
- DTS “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.
≥You cannot record MP3 signals.
–
Can I switch to MTS during
recording?
≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, you cannot. Change before recording with the “Select MTS” in the SETUP
menu.
VHS
DVD
PP-Sample.book 64 ページ ２００４年３月８日 月曜日 午後６時３分