Proxima ASA Colour CCD Camera VCC-5775P - Manual (Page 16)

TROUBLESHOOTING
Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it
still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Centre.
No picture on the monitor screen
• Is the power turned on to all connected devices?
Is the voltage correct?
• Are all the signal connecting cables correctly
connected?
• Is the lighting sufficient?
• Has the lens cap been removed?
• Is the iris control correctly set?
The picture is not clear
• Is the monitor correctly adjusted?
• Is the flange-back position correctly set?
• Is the lens focus correctly adjusted?
• Are the lens surfaces clean?
If there is dust or finger prints on the lens, the
image quality will deteriorate. To clean the lens
use a soft cloth or a commercially available lens
cleaning set.
SERVICE
This camera is a precision instruments and if
treated with care, will provide years of satisfactory
performance. However, in the event of a problem,
the owner is advised not to attempt to make
repairs or open the cabinet. Servicing should
always be referred to your dealer or Sanyo
Authorized Service Centre.
L53V2/XE (VCC-5775P) GB 2000, 7, 11
English 15