Philips DVD Surround Receiver MX-1060D - Manual (Page 22)

22
English
On-screen messages
During play, various messages will be shown on the screen
for a few seconds to confirm that a function has been
selected. You can switch on or off these messages in the
“On Screen” setup mode of the System Setup menu.
The possible messages may appear are listed below :
PLEASE WAIT .................... The system is initialising.
READING ............................ Reading the disc.
OPEN ( й й й й й ) ...................... The tray is about to open.
CLOSE ( ) ...................... The tray is about to close.
DVD ................................. DVD disc is loaded.
MUSIC CD ..................... Music CD is loaded.
NO VALID DISC .............. Wrong disc format or damaged
disc cannot play; disc is loaded
upside down or no disc is in the
disc tray.
INVALID REGION DISC…The disc cannot play because
the regional code is different than
the player.
PARENTAL LEVEL TOO LOW TO PLAY
.................................................... The parental control has been set
and the disc cannot play.
PLAY (É ) ............................ Start playback.
PAUSE (Å ) ........................ Pause the disc.
STEP FWD ( ) ........... One frame forward in pause
mode.
STEP BWD ( ) .......... One frame backward in pause
mode.
CONTINUE (É ) ........... Continue playing after pause.
RESUME STOP ( )…Stop the disc but allow the disc
to be resumed from the same
place later.
RESUME ( ) ........... Playback is resumed.
STOP (Ç) ........................... The disc is completely stopped.
( ) ........................................ This function is not available.
NEXT CHAPTER ( )…Playback from beginning of next
chapter.
PREV CHAPTER ( ) …Playback from beginning of
previous chapter.
FAST FWD ( ) .......... Fast forward speed 1 (for DVD up
to speed 4, for CD up to speed 3).
FAST BWD ( ) ......... Fast backward speed 1 (for DVD
up to speed 4, for CD up to speed
3).
SLOW FWD ( ) ...... Slow forward speed 1 (for DVD
up to speed 4).
SLOW BWD ( ) .... Slow backward speed 1 (for DVD
up to speed 4).
MUTE ( ) ........................ The sound is muted.
UNMUTE ( ) ................. Sound mute is cancelled.
SKIPPING BAD DISC AREA …There is a damaged
section of the disc that the player
can skip over.
TRACK: 1 ............................. Track selection with a number key
(Music CD).
SKIP NEXT ( ) ......... Skip to the start of the next track
(Music CD).
SKIP PREV ( ) ........... Skip to the start of the previous
track (Music CD).
STAND BY .......................... Entering standby mode.
POWER ON ...................... Switched on from stand by.
BUTTON: 2 ......................... Indicates a menu selection using
the number keys.
DVD/CD O
PERATION