Primera Technology LX400 - Manual (Page 18)

14 Hardware and Software Settings
11. Push cartridge cover downward until it snaps in place.
12. Click OK on your screen to indicate the new cartridge is
now installed. Once you click OK you will be prompted to
align the cartridge. A warning will appear stating that you
must have installed label stock that is equal to or larger
than 4" x 4" (101.6 mm x 101.6 mm). If your label stock
meets this requirement click OK to align the cartridge.
If your stock does not meet this size requirement see
Section 2I before clicking OK.
I. ALIGNING THE INK CARTRIDGE
Cartridge alignment will align the Color Cartridge for bidirec-
tional printing and calibrate the printer to each individual
cartridge. You will automatically be prompted to perform this
alignment each time you install a new cartridge. You may also
manually align the cartridge via the printer settings which are
described in Section 3C (PC) and 4D (Mac).
For Alignment you will need to have installed label stock that
is equal to or larger than 4" x 4" (101.6 mm x 101.6 mm). If
your stock does not meet this requirement follow the steps
below:
a. Unload your current stock by pressing the Unload button.
The printer will reverse the label stock so that it can be
removed from the printer.
b Now click OK if you are continuing from Section H or
Send the alignment via the printer settings area. It is
important that you sent the alignment with no label stock
installed.
510984.qxd 11/21/2006 9:08 AM Page 14
TOC INDEX