Polaroid DVR-0800 - Manual (Page 20)

- 4 -
DVD+RW/DVD+R Disk Recording
Starting The Recording Session
1. The quality of the recording to a DVD+RW/+R disc
directly depends on the selection of the recording
mode. Decide on the quality of the recording you
want, taking into account the amount of the playback
time each recording mode requires.
Selecting Best, for example, means only one
80-minute recording can go on the disc. On the other
hand, that 80-minute recording will be excellent in
terms of its overall audio-visual quality.
2. To begin the recording setup, use the arrow keys
on the remote to call up the Recording Setup menu
from the main Setup menu, as shown here. The
Recording Setup menu is comprised of the
Recording Quality, Auto Chapter, Set Clock, and
Channel Select functions.
3. You can also determine how much time should be
allotted to every chapter of your recording, if desired.
These chapters can then be navigated through at
playback time by using the arrow keys on the remote
control. Press Enter to make the auto chapter
selection, as shown here.
4. Press the SETUP button on the remote to exit and
save the selection.
Recording Modes
The DVD-Recorder offers three DVD recording
functions:
• Quick Record allows you to perform a
simplified unattended timer recording.
• My Record List allows you to view all the
recordings that will be made onto the disk.
Note: Most prerecorded videocassettes and DVDs
are copy protected. If you try to copy them with the
DVD recorder, the Recorder display may show
“COPY PROTECT”.
One Touch Recording
1. From the Menu, select the Watch TV function. A
TV program appears on the TV screen.
2. Press the arrow keys on the remote to move
through your favorite channel selections. Each
channel will appear on your TV screen as you use
the tuner on the DVD Recorder to find the channel
you want.
3. Press the RECORD button on the remote control
to start recording the program on the TV screen. The
message “RECORDING” and a timer counter are
superimposed on the TV screen.
4. Press the STOP button to end the recording
session. The message “CLOSING” appears on the
screen, informing you the recording session is
ending. Wait a minute or so for active the disc title to
return to your TV screen.
Figure 8. The Record Program Menu