PhatNoise XXV-01D - Manual (Page 9)

English | 9
Notes on Multi-function System
What is the Multi-function System?
Multi-function System shows the Multi-function
display, allowing you to select various functions and
settings.
Functions available for the current source are
displayed.
Operational
1 Press the [NEXT] button to Show the Multi-
function display
Each time you press the [NEXT] button, the
Multi-function display is switched among the
Source Function display, System Function display,
and blank display.
Example: Multi-function display for CD source
Scan
Random
Repeat
S.F.C
S.M.S
EQ
SRS WOW
DSP
Display
• The operation ends automatically if you do not operate
within 10 seconds:
2 Turn the [VOL] knob to highlight the item you
want to select.
3 Press the [VOL] knob to select the highlighted
item.
• In the body text, steps 2 and 3 are described as follows:
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
• During Multi-function System mode, the [VOL] knob or
Control knob flashes to indicate that it is available for
multi-function setting.
Returning to the Previous Display
Select "Return" on the Multi-function display, or
press the [NEXT] button.
Real operational example of the Multi-
function System
Example: Turning ON/OFF the Random Play during
CD play.
1. Show the Multi-function display of the Random
Play.
Press the [NEXT] button.
Scan
Random
Repeat
2. Select the "Random" item
Rotate the [VOL] knob.
Scan
Random
Repeat
3. Turn ON/OFF the Random Play.
Press the [VOL] knob.
Each time you press the [VOL] knob under the
"Random" function display the Random Play is
turned ON/OFF.
Scan
Random
Repeat
• In the body text, steps 2 and 3 are described as follows:
Turn the [VOL] knob to select "Random".
Press the [VOL] knob.