Tuner features – PhatNoise XXV-01D User Manual
Page 30
30
|
English
Tuner features
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
Press button
92.1 MHz (FM)
[0], [9], [2], [1]
810 kHz (AM)
[0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
Station Preset Memory
Putting the station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [
4] or
[
¢].
3
Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to
9).
4
Select a preset number
Turn the [VOL] knob.
5
Put the frequency in the memory
Press the [VOL] knob for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] number.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
Preset Tuning
Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to
9).
3
Select a preset number
Turn the [VOL] knob.
4
Recall the station
Press the [VOL] knob.