Maintenance – Polaris Outlaw 9921123 User Manual
Page 179

176
Maintenance
Rear Suspension
Compression Damping
The compression damping clickers are located on the
bottom of the shocks (on the lower clevis). Use a
screwdriver to make adjustments.
To set the shock at the softest setting (position #1) turn
the screw counter-clockwise until it stops. From this
position, turn the screw clockwise to increase com-
pression damping.
Setting
Compression Damping
Softest
Position #1
Factory
Position #7
Clicker
This manual is related to the following products: