Paradyne 7510-A2-GB20-00 727 - Manual (Page 12)

2-1 7510-A2-GB20-00 March 1997
Using the Asynchronous
Terminal Interface
2
Connecting to the Terminal Port
The device used for the Asynchronous Terminal Interface (ATI) can be a
VT100-compatible async terminal, or a PC running emulation software. The
terminal or PC can be connected to the Terminal port directly, or through an
external modem.
Ensure that the device you connect communicates using these settings:
H Data rate set to 9.6 kbps.
H
Character length set to 8.
H Parity set to None.
H
Stop Bits set to 1.
Terminal port settings cannot be changed from the ATI.