beautypg.com

First entry power-up, 10 remove the usb key, Product registration and activation key retrieval – Polycom RMX DOC2551A User Manual

Page 4: 3 select the product registration link

background image

4

First Entry Power-up

8

Insert the USB key with the modified IP addresses in the USB port

on the back panel.

9

Power the RMX ON.

The parameters in the lan.cfg file are uploaded from the USB key to

the RMX’s memory and applied during the power-up sequence.
System power-up sequence may take up to five minutes.
During the first-time power-up the red ERR LED on the RMX’s

front panel remains ON until both the Management and IP

Network Services have been defined.

When the RMX's configuration is completed (including the

Management and IP Network Services), and if there are no System

Errors, the green RDY LED on the CNTL module (on the RMX’s

front panel) turns ON.

10 Remove the USB key.

Product Registration and Activation Key Retrieval

Before starting the initial configuration process, register the RMX at the

Polycom Resource Center website and download the product activation

key file to the computer you will use for the configuration:
1

Using a Web browser, connect to

http://portal.polycom.com

.

2

Login with your Email Address and Password or register as a new

user.

3

Select the Product Registration link.

4

Follow the on-screen instructions for Product Registration and

Product Activation. (The RMX’s serial number is on a sticker on the

back of the unit, if needed.)

5

Write down the Product Activation Key number or copy it for later

use.