Philips DVDR610 - Manual (Page 43)

43
English
3139 246 13454
Programming recordings
with the ShowView
® System
With this programming system, you only
need to enter the ShowView
®
programme number as all the information
needed by the DVD recorder for
programming is contained in the
programming number.
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer overview appears.
TIMER 11.55
TIMER OVERVIEW TIMER DETAILS
10:55 CNBC Weekly
23:45 Disco 12.04
21:00 BBC2 Daily
06:00 HBO 16.04
08:00 ABC 13.04
Delete New Timer Change
Start time
Stop time
Date
Repeat
Channel
VPS
Record Mode
12:00
18:05
15:07:2004
Once
199 BBC24
DVD HQ
Off
ShowView
3
Press the matching colour coded button
on the remote control to select
{ ShowView }.
➜
The ShowView ® entry screen appears.
TIMER MENU 12.55
ShowView system
Clear Store Cancel
4
Use the alphanumeric keypad 0-9 to
enter the ShowView
® code.
(e.g.,: 5-312-4 or 5,312 4, key in ‘53124’).
➜
This number is up to 9 digits long and
can be found next to the start time of the
TV programme in your TV listings
magazine.
●
To clear the ShowView ® entry, press the
matching colour coded button on the
remote control to select { Clear }.
●
To cancel the ShowView ® programming,
press the matching colour coded button
on the remote control to select
{ Cancel }.
➜
The timer overview appears.
5
Press OK to confirm, then press the
matching colour coded button on the
remote control to select { Store }.
➜
The system will store the timer entry
and return to the timer overview screen.
●
If the information is missing or not
available, you may be asked to enter more
information. Follow the instructions on
the TV.
●
If you want to make changes, use
3
4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
or the alphanumeric keypad 0-9.
6
To exit, press TIMER.
7
Insert a DVD+R(W).
8
Press STANDBY-ON to switch off the
DVD recorder.
➜
The DVD recorder must be in standby
mode in order for the timer recording to
occur. If not, a warning message will
appear ten minutes before the recording
starts.
➜
If you ignore the warning message, the
DVD recorder will switch to standby
mode automatically before the
programmed recording begins.
➜
The '
TIMER
’ icon will light up on the
display panel if a timer recording is set.
Timer Recording
(cont’d)
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
1DVDR6xx_Eng00_13454c 9/28/04, 1:26 PM 43