Philips DVDR610 - Manual (Page 27)

27
English
3139 246 13454
Fine tuning the TV channels
Decoder
DVD-VIDEO-TITLE 04|CO1
Analogue Ch.
STOP
Set-up
TV system
Nicam
Fine Tune
To improve the sound transmission
of the TV channel
NICAM is a digital sound transmission
system. Using NICAM, you can transmit
either one stereo channel or two
separate mono channels. However, if
reception is poor and the sound
distorted, you can turn off NICAM.
1
Move to { NICAM } and press 2 to
select { On } or { Off }.
2
Press 1 to confirm.
To finetune the TV channels
1
Move to { Finetune } and press 2.
2
Press 1 2 to fine-tune the TV channel
manually, then press the matching colour
coded button on the remote control to
select { Store }.
Installing the DVD Recorder
(cont’d)
Setting the time and date
If the DVD recorder does not set the
time and date correctly, you can set the
clock manually by following the steps
below.
1
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on the TV.
2
Press 4 repeatedly to select { Set-up }.
3
Press 2 repeatedly to select
{ Time-date }.
DVD-VIDEO-TITLE 04|CO1
Time-date
STOP
Set-up
Time
Date
4
Press 4 to select { Time } and press 2 to
enter the time field.
➜
{ 00 : 00 } (hours : minutes )
5
Press 3 4 to change the first digit and
press 2 to go to the next digit field.
6
Repeat step
5
until the time is entered
correctly, then press OK to confirm.
7
Press 4 to select { Date } and press 2 to
enter the date field.
➜
{ 00 : 00 : 0000 } (day : month : year).
8
Repeat step
5
until the date is entered
correctly, then press OK to confirm.
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
1DVDR6xx_Eng00_13454c 9/28/04, 1:25 PM 27