Paradyne 3980-A2-GZ40-20 - Manual (Page 11)

11 3980-A2-GZ40-20 November 1996
Table 4
(2 of 2)
S-Registers for SDC
S-Register
DCP LCD
Command
Sequence
Description
S31 SDC Bit Encoding.
Determines the type of bit encoding used when transmitting synchronous DTE
data.
Register has the following values:
0 = NRZ
1 = NRZI
The factory setting is NRZ.
Configure\Edit\
V42/MNP/Buffer
S32 SyncDTE CRC.
Determines whether the CRC of the DTE frame is transmitted from modem to
modem.
Register has the following values:
0 = Ignore
1 = CRC16
The factory setting is Ignore.
Configure\Edit\
V42/MNP/Buffer