Pioneer DVD-V5000 - Manual (Page 57)

57
10 Barcode Stack / Command Stack
Retain (Preserve) Barcode Stack/
Command Stack Settings
1 Press HOME MENU or RETURN with the
group or command selected.
2 Use the / (cursor left/right) buttons
to select “OK” then press ENTER.
Group001
Group002
001 SUBTITLE 01 AUDIO 2 ANGLE 3
002 03:123000-129000
003 GO TO GROUP-02
004
005
006
007
008
Command Stack
Group(1-002) Command(1-003)
Move Select ENTER Exit HOME MENU
OK CANCEL RETURN Save changes ?
Settings are not be saved if ENTER is
pressed when “ CANCEL” is highlighted.
Erase Barcode Stack/Command
Stack Settings
1 Use the
/ (cursor up/down) buttons
to select the step to be erased.
Group001 001 PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group(1-001) Command(1-003)
Move Select ENTER CLEAR Delete Exit HOME MENU
2 Press CLEAR.
Group001 001 03:123000-129000
002 05:03-07 03 2 1
003
004
005
006
007
008
Command Stack
Group(1-001) Command(1-002)
Move Select ENTER CLEAR Delete Exit HOME MENU
The selected step is erased and the
following steps increment up.
3 Save the change.
During the save step after an erase
operation, the step will not be erased if
ENTER is pressed on “CANCEL.” The
erasure is confirmed and recorded only
when
ENTER is pressed on “OK.”
Modify Barcode Stack/Command
Stack Settings
Example: To change audio setting
from 2 to 1 on step 003
1 Use the / (cursor up/down) buttons
to select step 003 then press ENTER.
Group001 001 PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group(1-001) Command(1-003)
Move Select ENTER CLEAR Delete Exit HOME MENU
2 Use the / (cursor up/down) buttons
to select “STACK CORRECTING” then
press ENTER.
“
STACK CORRECTING” appears only after a
step has been entered.
Group001 001 PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group(1-001) Command(1-003)
Move Select ENTER Exit HOME MENU RETURN Return
SEGMENT PLAY
CHAPTER PLAY
COMMAND
STACK CORRECTING