Pioneer DVD-V5000 - Manual (Page 38)

38
07 Audio Settings menu
2 Highlight Virtual Surround, then use the
/ (cursor left/right) buttons to
change to “ 2 V/SRS TruSurround” or
“Off” as required.
Audio Settings
Audio DRC
Virtual Surround
Off
Off
3 Press ENTER to make the setting and exit
the Audio Settings screen.
You can also use the SURROUND button on
the remote control to switch Virtual
Surround on (
2 V/SRS TruSurround)/Off.
• Virtual Surround doesn’t work with DTS or
96kHz linear PCM audio through either the
analog or digital outputs.
• If the player is outputting Dolby Digital or
MPEG bitstream audio (in other words, no
conversion to PCM), Virtual Surround has
no effect on the audio from the digital
output. See Digital Audio Out settings on
page 19 for how to set up the digital output
formats.
• How good the surround effect is varies with
the disc.