Panasonic Digital Fiber Sensor FX-301 - Manual (Page 18)

85
FX-301
R10 mm R0.394 in or more
מ
40 to
ם
100 °C
מ
40 to
ם
212 °F (Note 1)
Polyethylene
Polyetherimide
(Lens: Polycarbonate)
1 fiber attachment set, FX-CT2 (fiber cutter) 1pc.
Tying bands 4 pcs., anti-slip tubes 2 pcs.
Protective tube: R40 mm R1.575 in or more
Fiber: R15 mm R0.591 in or more
מ
40 to
ם
125 °C
מ
40 to
ם
257 °F (Note 1)
Polypropylene
(Protective tube: Fluorine resin)
Polycarbonate
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note 5)
R25 mm R0.984 in or more
(FT-H20W- Ⅺ: R10 mm R0.394 in or more, Sleeve of a head with sleeve: R10 mm R0.394 in or more)
מ
60 to
ם
350 °C
מ
76 to
ם
662 °F
(Note 1, 2)
35 to 85 %RH (No dew condensation or icing allowed)
Multi-component glass (Note 3) Silicone Acrylic Quartz glass (Note 3)
Stainless steel (SUS)
FT-H20W- Ⅺ, FD-H18-L31 and FT-H13-FM2: 1 fiber attachment set
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.)
R30 mm R1.181 in or more
(FT-Z802Y: R25 mm R0.984 in or more)
מ
40 to
ם
115 °C
מ
40 to
ם
239 °F
(FT-Z802Y: 0 to
ם
60 °C
ם
14 to
ם
140 °F )
Protective tube: Fluorine resin
Sheath: Polypropylene
(Sheath of FT-Z802Y: Fluorine resin)
1 fiber attachment set
FX-CT2 (fiber cutter) 1 pc.
R200 mm R7.874 in or more
(FT-60V: R30 mm R1.181 in or more)
מ
40 to
ם
120 °C
מ
40 to
ם
248 °F
Fluorine resin
Aluminum
Nuts 2 pcs. (thru-beam type: 4
pcs.) and toothed lock washer
1 pc. (thru-beam type: 2 pcs.)
מ
60 to
ם
300 °C
מ
76 to
ם
572 °F
(Note 1, 2, 3)
מ
60 to
ם
200 °C
מ
76 to
ם
392 °F
(Note 2)
מ
60 to
ם
180 °C
מ
76 to
ם
356 °F
(Note 2, 4)
מ
60 to
ם
130 °C
מ
76 to
ם
266 °F
Silicone
Inside stainless steel
(SUS) spiral tube
FD-H20-21:
Stainless steel (sus)
FT-H20W-
Ⅺ:
Fluorine resin
Brass (Nickel plated)
FD-H20-21: Stainless steel (sus)
Type
Special use
Item Ultra-small diameter Fixed-focus reflective Tough flexible
Type
Special use
Liquid level sensing
Item Model No. FD-F8Y FD-F4 Ⅺ/F9Ⅺ
FT-E12/E22: R5 mm R0.197 in or more (Note 1)
FD-E12: R10 mm R0.394 in or more (Note 1)
FD-E22/EN500S1/ENM1S1: R25 mm R0.984 in or more (Note 1)
FT-E12/E22, FD-E22:
מ
40 to
ם
70 °C
מ
40 to
ם
158 °F
FD-E12:
מ
40 to
ם
60 °C
מ
40 to
ם
140 °F
FD-EN500S1/ENM1S1:
מ
20 to
ם
60 °C
מ
4 to
ם
140 °F
35 to 85 %RH (No dew condensation or icing allowed)
Acrylic
Polyolefin
Brass (Nickel plated)
[Sleeve: Stainless steel (SUS)]
All fibers: 1 fiber attachment set
Threaded head fibers: Nuts 2 pcs. and
toothed lock washer 1 pc.
R10 mm R0.394 in or more
(FD-L43: R4 mm R0.157 in or more)
FD-L43: 0 to
ם
70 °C
ם
32 to
ם
158 °F
FD-L41/L42:
מ
40 to
ם
60 °C
מ
40 to
ם
140 °F
FD-L4:
מ
40 to
ם
70 °C
מ
40 to
ם
158 °F
Polyethylene (FD-L42: Vinyl chloride)
FD-L43/L41: Heat-resistant ABS
FD-L4: ABS
FD-L42: Aluminum (Black ALMITE)
Lens of FD-L43/L4: Acrylic
Front film of FD-L41: Polyester
All fibers: 1 fiber attachment set and
FX-CT2 (fiber cutter) 1 pc.
FD-L4: M2.6 (length 12 mm
0.472 in )
screws with washers 2 pcs. and nuts 2 pcs.
R10 mm R0.394 in or more
מ
40 to
ם
60 °C
מ
40 to
ם
140 °F
(FD-P81X:
מ
40 to
ם
70 °C
מ
40 to
ם
158 °F)
Polyethylene [FT-P81X: Vinyl chloride,
Protective tube: Stainless steel (SUS)]
FT-P81X, FD-P81X: Brass (Nickel plated)
FD-G6X: Stainless steel (SUS)
All fibers: 1 fiber attachment set , nuts 2
pcs. (thru-beam type: 4 pcs.) and toothed
lock washer 1 pc. (thru-beam type: 2 pcs.)
FD-G6X: FX-CT2 (fiber cutter) 1 pc.
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note 2)
SPECIFICATIONS
Notes: 1) Sleeve part cannot be bent.
Notes: 2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER
OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Fibers
Mater
ial
( )
35 to 85 %RH (No dew condensation or icing allowed)
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note 2)
Notes: 1) With the liquid sensing fiber, make sure that the temperature of the liquid is also within the ambient temperature range.
Notes: 2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER
OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Mater
ial
Environment resistant
Type Heat-resistant
Chemical-resistant Vacuum
Item 350 °C 662 °F type 300°C 572°F type 200°C 392°F type 180°C 356°F type 130°C 266°F type
Notes: 1) If the fiber is used below
מ
30 °C
מ
22 °F , its maximum resistable temperature drops to
ם
200° C
ם
392 °F . If the side-view lens FX-SV1 is put on the fiber head,
the allowable maximum temperature drops to
ם
300 °C
ם
572 °F . (The ambient temperature range of FX-SV1 is from
מ
60 to
ם
300 °C
מ
76 to
ם
572 °F. )
Notes: 2) The ambient temperature of heat-resistant 350 °C 662 °F type, 300 °C 572 °F type, 200 °C 392 °F type and 180 °C 356 °F type fibers are the value in dry
condition. In humid environment, the ambient temperature differs. (For a high humidity of 85 %RH, the ambient temperature is 0 to
ם
40 °C
ם
14 to 104 °F .)
Notes: 3) If the fiber material is quartz glass or multi-component glass, keep it away from vibration or impact.
Notes: 4) The normal temperature for continuous usage or storage should be
מ
60 to
ם
150 °C
מ
76 to
ם
302 °F.
Notes: 5) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER
OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Mater
ial
Fluorine resin
Stainless steel (SUS) Brass (Nickel plated)
1 fiber attachment set
FX-CT2 (fiber cutter) 1 pc.
08/2005