Panasonic Digital Fiber Sensor FX-301 - Manual (Page 15)

82
FX-301
FX-CT2
FX-CT1
FTP-500 (0.5 m 1.640 ft )
FTP-1000 (1 m 3.281 ft )
FTP-1500 (1.5 m 4.921 ft )
FTP-N500 (0.5 m 1.640 ft )
FTP-N1000 (1 m 3.281 ft )
FTP-N1500 (1.5 m 4.921 ft )
FDP-500 (0.5 m 1.640 ft )
FDP-1000 (1 m 3.281 ft )
FDP-1500 (1.5 m 4.921 ft )
FDP-N500 (0.5 m 1.640 ft )
FDP-N1000 (1 m 3.281 ft )
FDP-N1500 (1.5 m 4.921 ft )
FB-1
MS-AJ1-F
MS-AJ2-F
FX-AT2
FX-AT3
FX-AT4
FX-AT5
FX-AT6
FIBER OPTIONS
Designation
Protective tube
For thru-beam
type fiber
Protective tube
For reflective
type fiber
This is the attachment for the "1.3 mm " 0.051 in fiber (Accessory)
This is the attachment for the "1 mm " 0.039 in / "1.3 mm
" 0.051 in mixed fiber. (Accessory)
This is the attachment for the "1 mm " 0.039 in fiber
(Accessory. Does not attach with the FD-N4.) (Note 4)
This is the attachment for the "2.2 mm " 0.087 in fiber.
(Accessory. Does not attach with the FT-N8/NB8/P80 or the FD-N8/P80.)
This is the attachment for the fixed length fiber. (Accessory)
The free-cut type fiber can be easily cut.
Accessory. Does not attach with the FT-N8/NB8 or the
FD-N8/N4. (Note 3)
The fiber bender bends the sleeve part of the fiber head at the
proper radius. (Note 1)
Mounting stand assembly for fiber
(For M3, M4 or M6 threaded head fiber)
Fiber cutter
Attachment for fixed-
length fiber
Attachment for "2.2 mm
" 0.087 in fiber
Attachment for "1 mm
" 0.039 in fiber
Attachment for "1.3 mm
" 0.051 in fiber
Attachment for "1 mm
" 0.039 in / "1.3 mm
" 0.051 in mixed fiber
Universal sensor
mounting stand
(Note 2)
Fiber bender
For
M4
thread
The protective
tube, made of
non-corrosive
stainless steel,
protects the
inner fiber cable
from any
external forces.
FT-B8
FT-NB8
FT-FM2
FT-FM2S
FT-FM2S4 FT-N8
FT-P80
FT-P60
FT-H13-FM2
FT-T80
FT-NFM2
FT-NFM2S
FT-NFM2S4
FT-P40
FD-T40
FD-P40
FD-B8
FD-FM2
FD-FM2S
FD-FM2S4
FD-N8 FD-P80
FD-H13-FM2
FD-T80
FD-N4
FD-NFM2
FD-NFM2S
FD-NFM2S4
For
M3
thread
For
M6
thread
For
M4
thread
Applicab
le fibers
Model No. Description
Protective tube
• FTP-Ⅺ
• FDP-Ⅺ
Fiber bender
• FB-1
Universal sensor mounting stand
• MS-AJ1-F
• MS-AJ2-F
Using the arm which enables adjustment
in the horizontal direction, sensing can
also be done from above an assembly line.
(
( )
)
Notes: 1) Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber.
Notes: 2) Refer to p.332l for details of the universal sensor mounting stand.
Notes: 3) A conventional FX-CT1 fiber cutter is attached with the FT-P80 and the FD-P80.
Notes: 4) The conventional FX-AT10 fiber attachment is attached with the FD-N4.
Fiber cutter
• FX-CT2
• FX-CT1
Fiber attachment
It’s possible to simultaneously cut two fibers to the same length
Each fiber (with some exceptions) has a newly developed two-in-one fiber attachment (FX-AT3/AT4/AT5/AT6) which enables two fibers to be cut simultaneously
to the same length with the new fiber cutter (FX-CT2). Also, since the fibers can be attached to the amplifier while being fixed in position in the two-in-one fiber
attachment, sensitivity changes resulting from variation in the amount of fiber insertion do not occur.
FX-AT2 FX-AT3 FX-AT4/AT5/AT6
Others
Horizontal mounting type
Vertical mounting type
Note: The above figure is MS-AJ1-F.
The mounting base of MS-AJ2-F
has a different shape.
08/2005