Pioneer Elite PureVision PRO 1410HD - Manual (Page 11)

English
14
En
*1 Only when AUTO PICTURE is OFF.
*2 PC only
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE
FUNCTION POWER MGT. ON ←→OFF YES 22
INPUT SKIP ON ←→OFF YES 22
SUB. P DETECT AUTO ←→OFF YES 22
ZOOM NAV OFF ←→S BY S←→BTM LFT←→BTM RGT←→TOP RGT←→TOP LFT YES 23
PICTURE FREEZE OFF ←→S BY S1←→S BY S2←→BTM LEFT←→BTM RIGHT←→TOP RIGHT←→TOP LEFT YES 23
LONG LIFE MANUAL/AUTO YES 23
ABL 100/75/50/25 YES 24
ORBITER OFF/AUTO1/AUTO2 YES 24
INVERSE/WHITE OFF/INVERSE/WHITE YES 24
SCREEN WIPER ON/OFF YES 24
SOFT FOCUS OFF/LEVEL1-4 YES 24
OSD ORBITER ON/OFF YES 25
OSD CONTRAST LOW/NORMAL YES 25
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE
SIGNAL INFO. — 25
Information
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the SET UP menu. Note that this also restores other settings to the factory defaults.
OSD (On Screen Display) Controls
English
15
En
OSD (On Screen Display) Controls
Picture Settings Menu
Storing picture settings
This function allows you to store in memory the current
input signal and PICTURE menu settings and to recall
these settings when necessary.
There are six picture memories, and notes of up to 15
characters can be added to each.
Example: Storing picture settings at MEMORY1
On “PICTURE MEMORY” of “PICTURE” menu, select
“MEMORY1”, then press the MENU/SET button.
The “PICTURE MEMORY” screen appears.
P I C T U R E M E M O RY 1 / 2
SEL. ADJ. MENU OK
M E M O RY 1 S E T R E S E T
I N P U T : C O M P N T 1
S I G N A L : 4 8 0 P
N O T E : D V D / S TA R WA R S
M E M O RY 2
I N P U T : —
S I G N A L : —
N O T E : —
M E M O RY 3
I N P U T : —
S I G N A L : —
N O T E : —
N E X T PA G E
P I C T U R E M E M O RY 2 / 2
P R E V I O U S PA G E
M E M O RY 4 S E T R E S E T
I N P U T : —
S I G N A L : —
N O T E : —
M E M O RY 5
I N P U T : —
S I G N A L : —
N O T E : —
M E M O RY 6
I N P U T : —
S I G N A L : —
N O T E : —
SEL. ADJ. MENU OK EXIT RETURN
Information
Ⅵ PICTURE MEMORY Settings
OFF: Picture memory not used.
MEMORY1 to 6: Picture memory with the specified
number used. Maximum memories are 6, not depending
on inputs.
Ⅵ Setting the memory
• Use the
▲ and ▼ button to select the desired memory
place, MEMORY1 to MEMORY6.
• Use the ᮤ and ᮣ buttons to select “SET”, then press
the MENU/SET button.
• If necessary, input a note.
Ⅵ Resetting the memory
Use the
▲ and ▼ button to select the desired memory
place, MEMORY1 to MEMORY6, then use the ᮤ and
ᮣ buttons to select “RESET”, and finally press the
MENU/SET button.
The memory is cleared, and “—” is displayed in the
“INPUT”, “SIGNAL” and “NOTE” columns.
Ⅵ Inputting notes
• Use the
ᮤ and ᮣ buttons to select “NOTE”, then press
the MENU/SET button.
• Input the note.
Use the ▲ and ▼ button to select the character.
Use the ᮤ and ᮣ buttons to move the cursor.
Use the EXIT button to delete the character at the
cursor position.
• When you have finished inputting the note, press the
MENU/SET button.
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
On “CONTRAST” of “PICTURE” menu, adjust the contrast.
EXIT RETURN SEL. ADJ.
P I C T U R E
P I C T U R E M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
D N R
C O L O R T E M P.
G A M M A
L O W TO N E
S E T U P L E V E L
C O L O R M G T
P U R E C I N E M A
AV S E L E C T I O N : O F F
: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0
: O N
: D Y N A M I C
G R
C O N T R A S T 1 0
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
AV SELECTION is not set to DEFAULT.
Information
Ⅵ Picture adjustment screen
CONTRAST: Changes the picture’s white level.
BRIGHTNESS: Changes the picture’s black level.
SHARPNESS: Changes the picture’s sharpness.
Adjusts picture detail of VIDEO display.
COLOR: Changes the color density.
TINT: Changes the picture’s tint. Adjust for natural
colored skin, background, etc.
Ⅵ Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Ⅵ Restoring the factory default settings
Select “DEFAULT” under the “AV SELECTION”
settings.
Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.
Example: Setting “HIGH”
On “DNR” of “PICTURE” menu, select “HIGH”.
EXIT RETURN SEL. ADJ.
P I C T U R E
P I C T U R E M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
D N R
C O L O R T E M P.
G A M M A
L O W TO N E
S E T U P L E V E L
C O L O R M G T
P U R E C I N E M A
AV S E L E C T I O N : O F F
: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0
: O N
: D Y N A M I C
G R
D N R : H I G H
Information
Ⅵ DNR
* “DNR” stands for Digital Noise Reduction.
* This function reduces noise in the picture.
Ⅵ Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect increases stronger in the order of LOW, MID
and HIGH.
OFF: Turns the noise reduction function off.