Philips 25PV720/07 - Manual (Page 8)

Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’ Installation ’ with the B or
A button and confirm with the C button.
c Select the line ’ Manual store ’ with the B or
A button and confirm with the C button.
MANUAL STORE
Channel/Frequency FREQU.
TV system PAL I
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF
NICAM ON
ã Exit:
« press MENU
d In the line ’ Channel/Frequency ’, select the
display for:
’
FREQU. ’: frequency
’ C CH ’: channel
’ S CH ’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’
Search ’ with
the digit buttons 0-9 .
D If you don’t know the frequency or channel of the TV
channel of your choice, press the C button to start
the channel search.
f In the line ’ Programme number ’ select the
programme number you want e.g.: ’ P01 ’, using the
D or C button.
g If you want to change the TV channel name, press the
C button in line ’ Name edit ’.
E Select the character you want to change with the
D or
the C button. Change the character with the B or the
A button. Select the next character in the same way.
E To confirm the information, press the
OK button.
h In the line ’ NICAM ’, select funtion ’ ON ’ or ’ OFF ’ with
the C or D button.
i If you want to change the automatic tv channel setting,
select the line ’
Fine tuning ’.
With the D or C button you can vary the automatic tv
channel setting. Important: This re-tuning is only
necessary and useful in special cases, e.g.: when there
are stripes on the picture with cable-TV systems.
j Press the OK button to store the TV channel.
D If you want to search for further TV channels, start
again at step e .
k To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
EXT.1 .
To do this, select the channel number ’ E1 ’ with the qP r
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’ Installation ’ with the B or
A button and confirm with the C button.
c Select the line ’ Autoinstall ’ with the B or A
button.
6