Programming a recording (without ’videoplus’) – Philips 25PV720/07 User Manual
Page 18
D Under ’
VPS/PDC
’, use the
B
or
A
button to
switch ’VPS or PDC’ on or off.
D Under ’
LP
’, use the
B
or
A
button to select the
recording speed ’SP’ or ’LP’.
D The TIMER lamp on the front of the set lights up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
D If the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
D If you forget to load a cassette, ’
No cassette
’
will appear.
D If you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
g
Press the
OK
button.
h
Confirm the message on the screen with the
OK
button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
i
To end, press the
TIMER s
button.
Programming a recording (without
’VIDEOPlus’)
a
Press the
TIMER s
button on the remote control.
b
Select the line ’
Timer programming
’ with the
menu buttons
B
or
A
and confirm with the
C
button.
TIMER PROGRAMMING
VPS
DATE PROG. START
END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- --
--:-- --:-- - - -----
ã Exit:
Start:
« press TIMER
press è
c
Press the
C
button.
TIMER PROGRAMMING
VPS
DATE PROG. START
END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50 - * ONCE
ã Exit:
Start:
« press TIMER
press è
d
Select the entry field with the
D
or
C
button.
e
Enter information with the menu buttons
B
or
A
or
with the digit buttons
0-9
.
D Under ’
REP.
’, use the
B
or
A
button to select
daily or weekly programming.
’
Mo-Fr
’: Recording from Monday to Friday.
’
Mo-So
’: Recording from Monday to Sunday.
’
WEEKL
’: Recordings every week on the same day.
D If you want to make a TIMER-recordings from an
external source, use the
B
or
A
button to select
the setting ’
Record prepared
’ in the entry
field ’
PROG.
’. Your TV-VIDEO Combi will now be
controlled via the scart cable.
D Under ’
VPS/PDC
’, use the
B
or
A
button to
switch ’VPS or PDC’ on or off.
D Under ’
LP
’, use the
B
or
A
button to select the
recording speed ’SP’ or ’LP’.
f
Confirm with the
OK
button when the information is
correct.
g
Confirm the message on the screen with the
OK
button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
h
To end, press the
TIMER s
button.
i
Make sure that the cassette you have put in can be
recorded on.
16