Philips 25PV720/07 - Manual (Page 22)

Switching the remote control command
If you have two machines with the same remote control
command, you can change the remote control command of the
handset and the remote control command of your TV-VIDEO
Combi.
a Press the MENU button. The main menu appears.
b Select the line ’ Setup ’ with the menu buttons B or
A and confirm with the menu button C .
SETUP
Parental control OFF
Display MAX
Format 16:9 NORMAL
Sound only OFF
VCR 1/2 VCR 1
ã Exit:
« press MENU
c Select the line ’ VCR1/2 ’ with the menu buttons B or
A .
d Select ’ VCR1 ’ or ’ VCR2 ’ with the menu buttons D or
C
e Confirm with the OK button.
f On the remote control, press the STOP h button and the
digit button 2 at the same time to switch the remote
control to ’ VCR2 ’.
D If you want to switch back to ’
VCR1 , press the
STOP h button and the digit button 1 at the same
time.
g Confirm with the STOP h button.
D If the menu does not disappear, the TV-VIDEO Combi
didn’t recognise the remote control command.
Repeat step
g .
D After you changed the batteries in the remote
control, it will switch back to ’ VCR1 ’.
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
a Press the MENU button. The main menu appears.
b Select the line ’ Tape ’ with the menu buttons B or
A . Confirm with the menu buton C .
TAPE
Tape speed SP
Tape counter USED
Repeat play OFF
Video system AUTO
Jitter N. ACT.
Tracking (,,,,,,,,=,,,,,,$
Cleaning
ã Exit:
« press MENU
c Select the line ’ Repeat play ’ with the menu buttons
B or A .
d Select ’ ON ’ with the menu buttons D or C . If you
select ’ OFF ’, the function will be switched off.
e Confirm with the OK button.
f Press the MENU button.
20