Warning, Maintenance and lubrication, Engine cooling system – Polaris ATP 500 4x4 User Manual

Page 95

MAINTENANCE AND LUBRICATION

Engine Cooling System

Radiator Coolant Level (ATP 500)

NOTE: This procedure is required

only if the cooling system has been

drained for maintenance and/or repair.

However, if the recovery bottle has

run dry, the level in the radiator

should be inspected and coolant

added if necessary.
1. Using the tool provided, remove

the four screws securing the front

compartment (1). Remove the

front cover (2) by placing your

fingers under the front of the cover

and pulling upward.

2. Remove the pressure cap.
3. Using a funnel, slowly add coolant as necessary through the

radiator filler neck.

4. Replace the pressure cap and secure the front cover.
NOTE: Use of a non-standard pressure cap will not allow the

recovery system to function properly. Contact your dealer for the

correct replacement part.

WARNING

Escaping steam can cause severe burns. Never remove the

pressure cap while the engine is warm or hot. Always allow the

engine to cool before removing the pressure cap.