Planet Technology VRT-401G - Manual (Page 72)

L2TP Settings
Parameters Description
Enable L2TP Server
By enable this server, we can enable the operation of a
virtual private network (VPN) over the Internet.
Server IP Address Specify the IP Address that the L2TP clients talked with.
Note: The Server IP Address can be different to LAN IP
or WAN IP.
Client IP Pool Specify the IP Address for L2TP clients to use.
Authentication
You can use PAP, CHAP, or MSCHAP for authentication.
VPN Users
You can input up to ten usernames and passwords for
the L2TP/PPTP clients here.
Click <Apply> at the bottom of the screen to save the above configurations.
Note: L2TP client IP address must be public IP.
2.8.3 PPTP Server
PPTP is a protocol from Microsoft that is used to create a virtual private network (VPN) over the
Internet. It uses Microsoft's Point-to-Point Encryption (MPPE), which is based on RSA's RC4.
72