Planet Technology VRT-401G - Manual (Page 19)

Parameters Description
IP This is the IP address that your ISP has given you.
Subnet Mask Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
DNS This is the ISP’s DNS server IP address
Gateway IP This is the ISP’s IP address gateway
TTL
This is optional. Some ISP will check the TTL response to build
up the connection. When you select Enabled, VRT-401G will
respond the TTL time plus 1.
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the Fixed-IP x DSL connection. You can start using the router
now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
1.3 PPPoE
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
19