Panasonic ER327 - Manual (Page 7)

Cutting
procedure
Cutting the sides to the back
Trimming height
25 to 20mm
(15/16 to 13/16")
Trimming height
15 to 10mm
(9/16 to 3/8")
Cut from
25 - 20mm
(15/16 - 13/16")
Cutting around the ears
Make sure the switch is facing downwards
and cut by moving the trimmer upwards.
Hold down
the ears with
your fingers Make sure the switch is facing downwards
and cut by moving the trimmer upwards.
4
Cutting between the sides and back
Cut between the already
cut sides and back bit by
bit with the use of the
hair clipper attachment.
1
Trimming height
10 to 5mm
(3/8 to 3/16")
2
3
Cutting the nape of the neck
Slowly and carefully cut
a little at a time.
Make sure the switch is facing downwards
and cut by moving the trimmer upwards.
Make sure the switch is facing
upwards and cut by moving the
trimmer downwards.
Bring the trimmer
gently away from
the hair to finish. Bring the trimmer
gently away from
the hair to finish.
Cut a little, and then
gently separate the
trimmer from the hair.
11 12