Panasonic KX-FHD351 - Manual (Page 60)

Remote Operation
60
Listening to recorded
messages
1
Call your unit.
2
Press the remote operation ID during the
TAD/FAX greeting message.
3
Start remote operations.
When there are new recorded message
The voice guide will tell you the number of
new messages and they will be played
automatically.
Voice guide example:
“3 new messages.”
When there are no new messages
Voice guide example:
“No new messages.”
When voice memory is full
Voice guide example:
“Sorry, no more memory. Please erase
unnecessary messages.”
Erase unnecessary messages.
Remote operations using the
remote command key
{1}:repeats a message. If you press this key
within 5 seconds of the beginning of a message,
the previous message will be played.
{2}:skips a message.
{4}:repeats only the new messages.
{5}:plays back all the messages.
Answering device remote operation
1. Call your unit.
2. Press the remote operation ID
during the greeting message.
3. Press the remote command key.
L To record a message in a mailbox,
call your unit, press * and the
mailbox no. (1 or 2), then leave a
message.
L To retrieve messages from a
mailbox, call your unit, press * and
the mailbox no. (1 or 2), enter the
mailbox password, then press the
remote command key.
{4} New message playback
{5} All message playback
{6} Room monitor
{7} Re-records a greeting
message
{9} Stops re-recording of a
greeting message
{*}{4} Erases a specific message
{*}{5} Erases all messages
{8}{0} Changes to TEL mode
{8}{1} Turns on message transfer
Key Remote command {8}{2} Turns off message transfer
{0} Skips the greeting message {8}{3} Turns on pager call
{1} Repeats a message {8}{4} Turns off pager call
{2} Skips a message {*}{9} Activates fax function