Pioneer BONUS VIEW BDP-51FD - Manual (Page 17)

02
17
En
Caution
• Video signals are only output with a resolution of 480/60i when
connected using a video cable (included) or an S-Video cable
(commercially available).
• When connected to a TV using a video cable or an S-Video cable,
also connect using either audio cables (use the included cable
for 2-channel connections, a combination of the included cable
and commercially available cables for 7.1-channel connections),
an optical digital audio cable (commercially available), or a
coaxial digital audio cable (commercially available). It is not
possible to listen to the sound from devices connected with
HDMI cables (commercially available).
• Connect the player’s video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
Connecting an AV receiver
or amplifier
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
Note
• Make the settings in the Setup Navigator menu according to the
type of cable connected (page 20).
• To input video signals, connect using one of the following (not
including when connected using an HDMI cable): a component
video cable (commercially available), an S-Video cable
(commercially available) or a video cable (included).
Connecting using a commercially
available HDMI cable
Caution
• When connected to an AV receiver or amplifier using an HDMI
cable (commercially available), use another HDMI cable
(commercially available) to connect the AV receiver or amplifier
with the TV. If a component video cable (commercially
available), an S-Video cable (commercially available) or a video
cable (included) is connected to watch the picture, it is not
possible to listen to the sound of devices connected with HDMI
cables.
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 50).
R
R
AUDIO OUT (2 ch) AUDIO OUT (7.1 ch) VIDEO OUT
HDMI OUT
DIGITAL OUT
CONTROL IN
L
L
Y
P B
P R
FRONT
COAXIAL
OPTICAL
COMPONENT VIDEO AC IN
SURROUND CENTER
VIDEO
S-VIDEO
SUB WOOFER
SURROUND BACK
P B
P R
VIDEO
S-VIDEO
HDMI OUT
Player’s rear panel
To HDMI input terminal
From HDMI output terminal
AV receiver or amplifier
HD
MI
c
a
b
le
(comm
e
rc
ially
availa
b
le)
To HDMI input terminal
TV
HD
MI
c
a
b
le
(c
omme
rci
ally
av
ailable) Match the direction of
the plug to the terminal
and insert straight.
Direction of
signal flow