Audio- and video equipment keys – Philips FLAT TV 37PF9975 User Manual
Page 25
23
This system remote control operates the following Philips equipment:TV,VCR,
DVD, DVD/R, SAT (RC5/RC6), AMP (+TUNER), CD, CD/R.
Press the
Select
key to operate any of the equipment indicated in the display.
Another device can be selected by pressing
Select
repeatedly within 2 seconds.The
led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral equipment.
To return to TV mode press
Select
while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to
TV
mode.
When you do not want the remote to go back to TV mode, and to stay in the
mode selected, proceed as follows:
Select the desired mode with the
Select
key.Wait until no LED is lit. Press the
Select
key again simultaneously with the
OK
key for at least 2 seconds.The remote
will not go back to TV mode from now on and will remain in the mode selected.
To go back to the default setting of the remote (TV mode) repeat what is explained
above, selecting the TV mode.
Note: When the
Select
key is pressed and held for more than 2 seconds, the RC5/RC6
system select command is transmitted.
B
b
¬
+
-
V
+
-
P
v
b
i
0
h
q
Select
VCR DVD SAT AMP CD
MENU
OK
1
2
3
4
5
6
7
8
9
0
Ò
®
‡
π
†
Active Control
S
®
®
®
®
æ
B
to switch to standby
S
for pause (
VCR
,
DVD
,
CD
)
®
for record,
Ò
for rewind (
VCR
,
CD
);
search down (
DVD
,
AMP
)
‡
for stop
π
for play
†
for fast forward (
VCR
,
CD
);
search up (
DVD/AMP
)
æ
to select your choice of
subtitle language (
DVD
);
RDS news/TA (
AMP
);
to shuffle play (
CD
)
b
to select a dvd title;
RDS display (
AMP
);
info on screen (
CD
)
i
display information
MENU
to switch the menu on or off
-P+
for chapter, channel, track
selection
0 to 9
digit entry
0
tape index (
VCR
),
select a
DVD
chapter,
select a frequency (
AMP
)
U
VCR timer
Q
surround on/off (
AMP
,
CD)
cursor up/down
to select the next or the
previous disc (
CD
)
cursor left/right
to select the previous or
following track (
CD
)
search up/down (
AMP
)
Additionally the DVD, SAT and CD indicator can be programmed to operate the
DVD-R, SAT (RC6), CD-R instead.
&
Press the
Select
key repeatedly until no LED is lit.
é
To program
DVD-R
, press the
OK
key + digit 2.
To program
SAT (RC6)
, press the
OK
key + digit 4.
To program
CD-R
, press the
OK
key + digit 6.
From now on, when the corresponding (
DVD
,
SAT
,
CD
) indicator is selected,
the remote control will operate your DVD-R, SAT (RC6) or CD-R.
Note: To return to the modes programmed in the factory, either remove the batteries for a
few minutes, or press the
OK
key + digit 1 (DVD mode); or + digit 3 (SAT-RC5) or + digit
5 (CD mode).
Audio- and video equipment keys