Active control, Sound, Sound active control – Philips FLAT TV 37PF9975 User Manual
Page 14
12
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
&
Press the
h key on the remote control.
Note: Switch off all menus on screen.
é
The Active Control menu appears.
“
Press the cursor up/down to select the Active
Control values
Off
,
Minimum
,
Medium
or
Maximum
.
The picture settings are being optimised
continuously and automatically which is
displayed by bars.Those menu items can not be
selected.
‘
Press the cursor right to select
Smart
Picture
.
(
Press the cursor up/down to select one of the
predefined picture settings.
§
Press the cursor right to select
Active
Display
.
è
Press the cursor up/down to select
Show bars
,
one of the Dual screen demos or
Off
.When
you select Dynamic contrast, Pixel Plus, Digital
Noise Reduction or Digital Natural Motion, the
TV screen is divided into two parts: in the left
part the selected picture quality setting is
switched off; in the right part it is switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
!
Press the
h key again to switch off the Active
Control menu.
&
Press the cursor right to select
Sound
.
é
Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor
left/right.Remember, control settings are at normal mid-range
levels when the bar scale is centred.
Smart sound
Select Smart sound to display a list of predefined sound settings,
each corresponding with specific factory settings of Treble and
Bass.
Personal
refers to the personal preference settings of
sound in the sound menu.
Notes:
- Some menu items are only available in case of a Cinema Link
configuration and when the Cinema Link is activated. Others are
steered by the audio receiver instead of by the TV. See the separate
Cinema Link booklet supplied, p. 26.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo
transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
Sound
Smart sound
Equalizer
Volume
Balance
Loudness
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
TV
Sound
Active Control