Philips FLAT TV 37PF9975 - Manual (Page 22)

20
To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz).
& Connect the audio cable of the external subwoofer to
the
SUBWOOFER socket at the rear of your TV.
é Select Subwoofer in the Setup, General menu, p. 9.
“ Adjust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.
‘ Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.
3
1
2
S•VIDEO VIDEO AUDIO
SUBWOOFER
Connect extra subwoofer
Multi channel Surround receiver
& Connect the audio cable to the multi channel Surround
receiver and to
AUDIO OUT L and R at the bottom of
your TV 1.
é If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
CENTRE IN at the
bottom of your TV 2.
“ Select Centre Input On in the Source menu. See p. 10.
The loudspeakers of the TV will now only produce
centre sound, the loudspeakers connected to the audio
receiver will produce Surround Sound.The volume has
to be controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external
source is blocked via the Child lock menu (see p. 13).
2
CENTRE IN
AUDIO
OUT
R
1
L
Camera, Camcorder or Game
& Connect your camera, camcorder or game as shown.
é Connect to VIDEO
2 and
AUDIO L
3 for mono
equipment. For stereo equipment also connect
AUDIO R
3.
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
S-VIDEO input
1 and
AUDIO inputs 3.
Do not connect cable 1 and 2 at the same time. This
may cause picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume to adjust
the headphone volume.
Front connections