Panasonic KX-FPC95 - Manual (Page 65)

65
Receiving Faxes
Pager call - when the unit receives a fax
or voice message
!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
● If you have subscribed to a Caller ID service, your pager will display the caller’s
telephone number before the number “11” or “22” (see below).
1 Press .
Display:
2 Press , then .
3 Press .
4 Rotate to select “ON”.
● If this feature is not required, select “OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or
pauses.
Example:
1 202 555 1234PP12345678PP
7 Press .
● The unit will dial the stored number.
8 Check that your pager receives a pager test
call.
9 Press . DIGITAL SP-PHONE
12 PAGER 1 TEST
SET
NO.=
SET
MODE=ON
JOG DIAL
MODE=OFF
SET
PAGER 1 CALL
7 0
1.SYSTEM 1 SET 1 UP
MENU
SET REDIAL/PAUSE
(Pause)
JOG DIAL
MENU Display
DIGITAL SP-PHONE DIGITAL SP-PHONE
Your pager
number
Pauses
Your pager access
code, if required.
Your pager will beep and display as follows;
— “11” : when your unit receives a voice
message.
— “22” : when your unit receives a fax
document.
Pager
2 2
Example:
Your unit received
a fax document.
When your pager receives a pager call