Reference, Vhs dvd – Panasonic DIGA DMR-ES30V User Manual
Page 71
Reference
71
VQT0P03
VHS
DVD
Re
fe
re
nc
e
Recording, Timer recording, Transfer (dubbing), External input
Page
DVD Picture
Page
Timer recording does not work
properly.
G-
CODE
system does not work
properly.
≥The timer programme is incorrect or different timer programme times overlap. Correct the
programme.
≥The clock is not correct. Set the clock.
≥The unit is not on timer recording standby. (“
” on the unit’s display is not on.)
Press [
, TIMER].
Timer recording does not stop
even when [
∫, STOP] is
pressed.
≥Press [
, TIMER] to turn “
” off. Recording stops.
≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”,
you cannot then stop recording for a few seconds.
43
The timer programme remains
even after recording finishes.
≥The timer programme remains if set to daily or weekly.
Cannot transfer (dub) VHS to
DVD.
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC
≥TP channel is not selected on DVD when recording from a video tape to a disc. Select TP
channel.
≥Some video tapes on the market (including rental videos) are copy-protected to prevent illegal
reproductions. Copy-protected video tapes cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timer
recording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.
–
–
Cannot transfer (dub) DVD to
VHS.
≥A video cassette without the accidental erasure prevention tab is inserted. Use a video
cassette with an accidental erasure prevention tab.
≥DC channel is not selected on VHS when recording from a disc to a video tape. Select DC
channel.
≥Some DVDs on the market (including rental DVD) are copy-protected to prevent illegal
reproductions. Copy-protected DVDs cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timer
recording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.
–
–
The sound level after
transferring (dubbing) is not
equal on DVD and on VHS.
≥The sound level on DVD and VHS may not match depending on the disc. When the sound
level in a particular part of the sound source is soft or loud, the sound may be recorded softly
or loudly on a video tape.
–
Stripe-shaped black noise is
recorded.
≥The device in playback is interfering with the TV because the device is too close to the TV.
Move the device away from the TV.
–
Cannot record video or sound
from the external device.
≥The external device is not correctly connected.
≥The proper external input channel (AV1, AV2 or AV3) is not selected.
∫ DVD
On-screen messages do not
appear.
≥Select “Automatic” in “On-Screen Messages” in the SETUP menu.
The grey background does not
appear.
≥Select “On” in “Grey Background” in the SETUP menu.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in
the Picture menu to “Off”.
≥Check the settings for “TV Aspect” in the SETUP menu.
42
There is a lot of after-image
when playing video.
≥Set “Playback NR” in the Picture menu to “Off”.
39
When playing DVD-Video using
progressive output, one part of
the picture momentarily appears
to be doubled up.
≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method
or material used on DVD-Video, but should be corrected if you use interlace output.
There is no apparent change in
picture quality when adjusted
with the Picture menu in the on-
screen menus.
≥The effect cannot be seen with certain types of video.
–
M7620(GN).book 71 ページ ２００５年５月２５日 水曜日 午後１２時２分