Philips 330 - Manual (Page 11)

Getting started 9
4. Replace the battery in its slot as shown below:
first place its right side against the right edge of
the phone and press until it clips.
5. Slide the battery door into its slots, metallic con-
nectors downwards, until it stops.
Enter the PIN code
1. To switch on the phone, press and hold the
)
key.
2. When you switch on the phone, you may be
prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect
it from abusive use. It is preconfigured and com-
municated to you by your operator or retailer. To
personalise the PIN code, see “Change codes”
page 27.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
3. Enter your PIN code. If you make a mistake,
press
e
. Then confirm by pressing
,
or
#
.
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
e
to erase a number), then press
,
to validate.
Proceed in the same way to set the time.
For complete date and time options, see page 27.
Philips330_EMEA_Ind3.book Page 9 Jeudi, 31. juillet 2003 3:48 15