Philips MCM239D - Manual (Page 18)

18
English
Tuner
Tuning to radio stations
1
Press SOURCE once or more to select
TUNER (or TUNER on the remote control).
2
Press TUNER on the remote control.
repeatedly to select your desired waveband, FM
or MW.
➜ Display shows: , radio station frequency,
waveband and if programmed, a preset number.
3
Press and hold
4 / ¢ until SEARCH
appears.
➜
The radio automatically tunes to a station
with sufficient reception. Display shows
SEARCH
during automatic tuning.
➜
FM: If a station is received in stereo, is
shown.
4
Repeat step 3 if necessary until you find the
desired station.
●
To tune to a weak station, press
4 / ¢
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
(FM and MW) in the memory, manually or
automatically (Autostore).
Autostore: Automatic programming
Automatic programming will star t from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press the ALBUM/ PRESET buttons once or
more to select the preset number where
programming should start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold PROGRAM until AUTO
appears.
➜ PROG flashes.
➜
Available stations are programmed in order
of waveband reception strenght: FM followed by
MW.
➜
After all stations are stored, the first preset
station will then be played.
Manual programming
1
Tune to your desired station (see Tuning to
radio stations).
2
Press PROGRAM to activate programming.
➜ PROG flashes.
3
Press ALBUM/ PRESET to allocate a number
from 1 to 40 to this station.
4
Press PROGRAM to confirm.
➜ Display shows the preset number, waveband
and the frequency of the preset station.
5
Repeat steps 1-4 to store other stations.
● You can erase a preset station by
storing another frequency in its place.
To listen to a preset station
● Press the ALBUM/ PRESET buttons once or
more until the desired preset station is displayed.
MCM239D_79_Eng 23/8/07, 9:53 18