Philips 6400 - Manual (Page 16)

iPronto User Guide
13
Installing and Recharging the Battery
Recharging
The iPronto is provided with a power adapter to recharge the battery.
It is best to fully recharge the battery. It takes 2 to 3 hours to recharge the battery. Recharging automatically stops
when the battery is full.
If you recharge when the battery is completely empty, you might lose some of your settings.
In normal use, recharge every 2 days. When you use the iPronto very frequently, recharge every day.
You can use the iPronto while it is being recharged. While the battery is being recharged, the Status Display shows a
full battery indication.
Plug in the power adapter as shown in the illustration:
The first time you put the battery in the iPronto, the iPronto will
start up automatically and guide you to the System Settings.
This may take 1 to 2 minutes. Continue with the next chapter,
Getting the iPronto Up and Running, to adjust the settings.
iPronto 1.6 IFU En .qxd 22-04-2004 17:23 Pagina 13