Pentax Digtial Camera Optio P70 - Manual (Page 111)

109
3
Ta
king
Pict
ures
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode] menu.
5
Press the 3 button.
The camera returns to capture status.
You can set the area of the screen where the brightness is metered to
determine the exposure.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AE Metering].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the AE Metering setting.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Setting the AE Metering
L
Multi-segment
metering The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
M
Center-weighted
metering
The camera takes a reading of the overall brightness of
the picture with the center of the image having more
influence on the exposure.
N Spot AE metering
The camera determines the exposure by metering the
brightness only at the center of the image.
1 / 3
12 M
AWB
Rec. Mode
MENU Cancel OK OK
Recorded Pixels
Pixel Track SR
White Balance
AE Metering
Sensitivity
Focusing Area
Auto