Panasonic CF-W5 - Manual (Page 19)

19
G
ett
in
g S
ta
rte
d
U
se
ful
In
formati
on
Trouble
s
hooting
Appendi
x
3 Press the RAM module down until the right and left hooks (D)
lock into place.
z When pressing down the module, the right and left hooks will open slightly and
will return after locking.
z If it is hard to press down the RAM module, do not try forcibly but check the
module’s direction.
4 Set the cover and battery pack back.
NOTE
z If the RAM module is recognized correctly, the total size of this computer’s memory and RAM module memory is dis-
played on the [Information] menu of the Setup Utility.
If the RAM module is not recognized, turn off the computer and insert it again.
1 Carefully open the left and right hooks (E).
The RAM module will be raised.
2 Carefully remove the RAM module from the slot.
3 Set the cover and battery pack back.
Removing the RAM Module
CF-W5mk2-PCSC.book 19 ページ ２００６年１０月２日 月曜日 午後１時１２分