Panasonic KX-FP343AL - Manual (Page 14)

1. Introduction and Installation
12
L Make sure that the ink film is wrapped
around the blue core (
2) at least once.
6 First close the back cover securely ( 1) by
pushing down on the dotted area at both
ends (
2). Then close the front cover
securely ( 3).
1.5.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 9 for accessory information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
1 Open the covers (see steps 1 to 3 on page
11).
2 Remove the used core ( 1) and used ink film
(
2).
3 Remove the stoppers (
1) and tags (2) from
the new ink film ( 3).
4 Insert the ink film and close the covers (see
steps 4 to 6 on page 11).
Tight
1 turn
Slack/Crease
Reverse
Correct
The ink film is not wrapped
around the blue core.
Incorrect
2
2
1
3
2
1
2
1
1
3
FP343AL.book Page 12 Tuesday, August 5, 2003 3:20 PM