Philips FW P88 - Manual (Page 25)

25
English
3139 116 19721
STANDBY
ON
MINI HIFI SYSTEM
BAND C 1 • 2 • 3 CDR
DUB (HSD) RECORD A. REV DIM CLOCK/
TIMER PROG
BASS TREBLE
wOOx TECHNOLOGY
POWER SAVE
IR SENSOR
VOLUME
PLUS LEVEL
RDS
DOLBY B NR
NEWS/TA
CD TEXT BAND
STOP •CLEAR SEARCH•TUNING PLAY PAUSE PREV NEXT SIDE PRESET ▲ ▲ BASS/ TR EB LE
P E R S O N A L
D S C
VE C
TAPE 1•2 CD 1•2•3 CDR/DVD
TAPE CD TUNER AUX
LEFT CENTER RIGHT
SURR SURR
PRO LOGIC
RECORDING
SWITCH OFF DOLBY PRO LOGIC
WHEN RECORDING
Notes:
– It is not possible to change tape side
during recording.
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
wOOx, DSC, etc.
Dolby B NR can be selected for Tuner or
CD recording.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If “ CHECK TAPE” is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press í or ë to select the recording
tape side (see Tape Side under TAPE
section).
4 Press DOLBY B NR to record with
Dolby B NR.
5 Press CD, TUNER or AUX.
• Start playback of the selected source.
6 Press RECORD to start recording.
™ The REC starts flashing.
7 Press Ç to stop recording.
Notes:
– Only
е е е е е or ∂ ∂ ∂ ∂ ∂ mode is available
during recording .
– During recording, it is not possible to
listen to another source.
pg 01-31/P88/22-Eng 3/6/00, 1:27 PM 25