Panasonic CR-W400U - Manual (Page 13)

12
❏ Installation Procedures
Note: Disconnect the cable from the negative (–) battery terminal.
1 Mounting Collar
Dashboard
Mounting Tab
Screwdriver
2. Secure the rear of the unit.
a) Insert Power Connector to the unit.
b) Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar
ቢ
and push it in until "click" is heard.
Unit
Power Connector 8
1. Secure the Mounting Collar
ቢ
.
Insert Mounting Collar
ቢ
into the vehicle's dashboard, and bend mounting tabs out with a
screwdriver.
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
your hands and fingers.
We strongly recommend you to wear gloves for installation work to protect yourself from injuries.